|
© 2007 KnowWare
International, Inc. DBA LifeStar
2253 S. Oneida St., Ste 3D
Denver, CO 80224
Jay Arthur
888-468-1537
303-756-9144
Email Us
We help people think!
|
|
DOE Software to Fine Tune Your Production Process
Many manufacturing processes and some service processes can benefit from
using Design of Experiments (DOE) to optimize their results. Design
of Experiments is easy with the right DOE software.
Without DOE software, you're stuck with the world's slowest
method for success-trial and error. With Design of Experiments,
you just have to test at the high (+) and low (-) values for any particular
"design factor" (e.g., pressure, temperature, time, etc.) from
your QFD House of Quality, not every increment in between. And you can
test more than one factor at a time.
You can make Design of Experiments wildly complex or straightforward
and simple. In my first Design of Experiments class we spent an inordinate
amount of time understanding "orthogonal arrays" and all of
the other "behind the scenes" mathematics, but you don't need
to know all of that to conduct a Design of Experiments study - especially
if you have good DOE Software.
Manufacturing Example
For simplicity, let's assume you are writing a cookbook and want to find
the best directions for baking a cake (which is similar to baking paint
on a car finish). To do this, you will want to establish the high-low
settings for each "factor" in your study. Let's suppose you
have four factors (a four factor experiment):
- Pan shape: Round (low) vs square (high) pan
- Ingredients: 2 vs 3 cups of flour
- Oven temperature: 325 vs 375 degrees
- Cooking Time: 30 vs 45 minutes
Let's say that you'll rank each resulting cake on a 1-10 scale for overall
quality.
You then use the +/- values in the orthogonal array to guide your test
of every combination (16 total):
- High: all high values (+ + + + = square pan, 3 cups, 375 degrees,
45 minutes)
- Low: all low values (- - - - = round pan, 2 cups, 325 degrees,
30 minutes)
- In Between: every other combination ("+ + + -", "+
+ - -", and so on).
To optimize your results, you might want to run more than one test of
each combination. Then you just plug your data into a 16-factor DOE
software template (Taguchi or Plackett-Burman format) like the one
in the QI Macros and observe the interactions.
Here is a sample QI Macros Plackett Burman DOE software Template
 <
The QI Macros for Excel SPC Software
includes Taguchi 4, 8 and 16 factors and Plackett-Burman. You can buy
a DOE software template separately or as part of the QI Macros.
Order DOE Software Template
Design of Experiments - $99 Download Only
Order the QI Macros for Excel SPC Software
QI Macros Excel SPC Software for Histograms and Control Charts $139 Plus S&H
In Design of Experiments, they talk about "confounding"
which simply means that one factor affects another. You'd expect
a higher temperature to result in a shorter cooking time, and vice versa,
but does a square pan take longer than a round one? Using the results,
a Design of Experiments program will draw the interactions between
each of the factors as a line graph.
If the two lines are parallel, there's no interaction. Is one end higher
than the other? If so, you can immediately tell which value (high/low)
gives you the best result.
If the two lines cross, there is an interaction (confounding). And, by
looking at where the two lines intersect on the graph, you can determine
the optimum settings (e.g., time and temperature) to get the best cake.
To do this using trial-and-error would take hundreds, maybe even thousands
of trials, not just 16.
Here are sample charts created by the QI Macros DOE Software.
Service Example:
People who send direct mail rigorously tally their results from each mailing.
They will test one headline against another headline, one sales proposition
against another, or one list of prospects against another list, but they
usually only do one test at a time. What if you can't wait? Using Design
of Experiments, you could test all of these factors simultaneously.
Design your experiment as follows:
- Headline: Headline #1 (high), Headline #2 (low)
- Sales proposition: Benefit #1 (high), Benefit #2 (low)
- List: List #1 (high), List #2 (low)
- Guarantee: Unconditional (high), 90 days (low)
This way you might find that headline #1 works best for list #2 and vice
versa. You might find that one headline works best with one benefit.
DOE Software can help you shorten the time and effort required
to discover the optimal conditions to produce Six Sigma quality in your
delivered product or service. Don't let the +/- arrays baffle you.
Just pick 2, 3, or 4 factors, pick sensible high/low values, and
design a set of experiments to determine which factors and settings
give the best results.
Start with a 2-factor and work your way up. Have fun! It's just not that
hard, especially with the right software.
DOE Software for Excel includes Taguchi 4,8 and 16 factors and
Placket-Burman. Buy one separately or as part of the QI
Macros for Excel SPC Software.
Order DOE Software Template
Design of Experiments - $99 Download Only
Order the QI Macros for Excel SPC Software
QI Macros Excel SPC Software for Histograms and Control Charts $139 Plus S&H
© 2007 KnowWare International Inc. (888) 468-1537
knowwareman@qimacros.com
Home
| Lean Six Sigma
| QI Macros
| KnowWare
| Site Map
|
Download
FREE
30-Day Trial
This is one of 19 SPC charts and over 70 templates included with the QI Macros
for Excel SPC Software $139. Just select the data you want graphed and in just
seconds the QI Macros will draw the graph and do all the math for you.
The QI Macros draws line, pie, bar, pareto, box whisker, histogram (Cp, Cpk),
scatter and control charts (with stability analysis).
Templates include the Ishikawa diagram, QFD, DOE, FMEA, PPAP, and Gage R&R
for MSA. Performs ANOVA, t-test, F-test, and regression analysis.
|
